COMPANY
WITH QUALITY SYSTEM
 
CERTIFIED BY DNV
 
   
                   
Composizione chimica delle leghe di Magnesio per fonderia
   
Desig.ne ASTM Al % Zn % Mn %  Si % Cu %  Ni %  Fe %  Altre imp. (tot)  Altre imp. (cad.)
         max  max  max  max  max  max
                 
AM50 A 4.5-5.3 0.20 max 0.28-0.50         0,05 0,008       0,001       0,004  -                  0,01
                 
AM60 B 5.6-6.4 0.20max 0.26-0.50         0,05 0,008       0,001       0,004  -                  0,01
                 
AZ63 5,5-6,5 2,7-3,3 0.15-0.35         0,20 0,2       0,010       0,005                 0,30                  0,05
                 
AZ91C 8,3-9,2 0,45-0,9 0,15-0,50         0,20 0,08       0,010  -                 0,30  -
                 
AZ91D 8,5-9,5 0,45-0,90 0,17-0,40         0,05 0,025       0,001       0,004                 0,10  -
                 
AZ91E 8,3-9,2 0,45-0,9 0.17-0.50         0,20 0,015       0,001       0,005                 0,30                  0,01
                   
AM60B, AM50A Leghe per pressofusione. Adatte per impieghi ove si richiede duttilitą e resistenza.  
Tipico impiego: armature per volanti e sedili auto.
Suitable for high pressure die castings where ductility is required.
AZ63 Lega per fonderia. Di impiego tipico per la produzione di anodi per protezione galvanica di boilers e
strutture interrate in acciaio.
Foundry alloy. Special end use for sacrificial anodes. I.e. for galvanic protection  
of water heaters and underground steel structures.
AZ91D Lega di magnesio pił diffusa per getti in alta, bassa pressione e gravitą.
The most used alloy for both high and low pressure die casting.
AZ91E Lega di impiego generale per getti in sabbia ed in cera persa.
Suitable for sand, permanent mold and investment casting.